Shopping Options

Category

1. Workpiece Fixtures for Contracers (6)
2. Mitutoyo Surface Finish, Roundness & Contrace (232)
3. Mahr surface finish & Profile Gauges (4)
4. CP200 (5)
5. Comparison Surface Finish Kits (61)
6. Surtronic (5)
7. PLASTIFORM (17)
8. Contracer Styli (39)

Manufacturer

1. GAR (7)
2. Mahr (3)
3. Mahr Federal (1)
4. Mitutoyo (299)
5. PAV (1)
6. Rubert (54)
7. Starrett (3)
8. Taylor Hobson (4)
9. Tesa (19)
10. Zeiss (1)

Accuracy

1. X1 = ±(0.3+0.2L/100)µm with standard stylus / Y = ±(2+2L/100)µm / Z1 = ±(0.3+|0.5H|/25)µm (2)
2. X1 = ±(1+2L/100)µm* / Z1 = ±(2+|H|/25)µm (5)
3. ±(0.8+L/100)µm (X1), where L = measured length in mm; ±(1.6+|0.5H|/25)µm (Z1) , where H = measured height from the horizontal. (2)
4. ±(2.5+0.02l)µm (X1), L = measurement length (mm); ±(2.5+|0.1H|) µm (Z1), H = measurement height from the horizontal position within ±25mm (1)

Dimensions

1. 1166 x 482 x 1176 (main unit), 221 x 344 x 490mm (controller), 248 x 102 x 62.2mm (remote box) (2)
2. 1406 x 575 x 1176mm (2)
3. 450 x 360 x 486mm (5)
4. 651x143x138.5 mm (1)
5. 745x450x885 mm (1)
6. 800 x 620 x 1200mm (2)
7. 800 x 651 x 1000mm (5)
8. 890 x 490 x 840mm (1)

Part Number

1. 178-481-1E (1)
2. 178-482-1E (1)
3. 178-482-2E (1)
4. 178-483-1E (1)
5. 178-531-01E (1)
6. 178-531-02E (1)
7. 178-533-01E (2)
8. 178-544-2E (1)
9. 178-549-2E (1)
10. 178-561-01E (1)
11. 178-561-02E (1)
12. 178-563-02E (1)
13. 178-565-02E (1)
14. 178-571-01E (1)
15. 178-571-02E (1)
16. 178-573-02E (1)
17. 178-575-01E (1)
18. 178-575-02E (1)
19. 178-581-01E (1)
20. 178-581-02E (1)
21. 178-583-01E (1)
22. 178-583-02E (1)
23. 178-635-01E (1)
24. 178-635-02E (1)
25. 178-637-01E (1)
26. 178-637-02E (1)
27. 178-681-01E (2)
28. 178-681-02E (1)
29. 178-683-01E (1)
30. 178-683-02E (1)
31. 178-685-01E (1)
32. 178-685-02E (1)
33. 211-601E (1)
34. 211-627E (1)
35. 211-733 (1)
36. 218-428E (1)
37. 218-468 (1)
38. 218-544-2 (1)
39. 218-584-2 (1)
40. 218-621E (1)
41. 218-642E (1)
42. 525-458-1E (1)
43. 525-498A-1 (1)
44. 525-544-2 (2)
45. 525-644-2 (1)
46. 525-724-2 (1)
47. 525-744-2 (1)

Measuring Speed

1. 0.00078" - 0.2"/s (0.02 - 5mm/s) (26)
2. 0.02-0.2mm/s (surface roughness) / 0.02-2mm/s (form/contour) (2)
3. 0.02-2mm/s (2)
4. 0.05, 0.1, 0.2, 0.5, 1.0mm/s (0.002, 0.004, 0.02, 0.04 inch/s) (4)
5. 0.2, 0.5mm/s (2)
6. 0.2-5mm/s (2)
7. In the measurement: 0.25mm/s (.01inch/s), 0.5mm/s (.02inch/s), 0.75mm/s (.03inch/s), In the return: 1mm/s (.04inch/s) (5)
8. Measuring: 0.01, 0.02, 0.03 in/s (0.25mm/s, 0.5mm/s, 0.75mm/s) Returning: 1mm/s (4)

Drive Unit

1. Retractable type (178-235) (2)
2. Standard type (178-230-2) (4)
3. Transverse tracing type (178-233-2) (3)

Detector

1. 0.75mN type (178-296) (2)
2. 0.75mN type (178-387) (1)
3. 4mN type (178-386) (2)
4. 4mN type (178-390) (4)

Stylus tip radius

1. 90°/5µm (200µinch) (12)
2. 2µm (3)
3. 5µm (6)
4. 60°/2µm (80µinch) (19)

Detector measuring force

1. 0.75mN (23)
2. 4mN (17)

Detector Conical taper angle

1. 60º (23)
2. 90º (18)

Filters

1. 2CR-75%, 2CR-50%, 2CR-75% (phase corrected) 2CR-50% (phase corrected), Gaussian, filter OFF (5)
2. Dedicated data processor type: 2CR-75%, 2CRPC-75%, Gaussian, Robust-spline (11)
3. Gaussian, 2CR75, PC75 (13)
4. PC system type: 2CR-75%, 2CR-50%, 2CRPC-75%, 2CRPC-50%, Gaussian, Rubust-spline (15)

Cut off length

1. 0.003, 0.01, 0.03, 0.1" (0.08 , 0.25 , 0.8 , 2.5mm) 100, 300µin (2.5 , 8µm) or none (4)
2. 0.08, 0.25, 0.8, 2.5, 8 mm (.003, .01, .03, .1, .3 inch) 2.5, 8 µm (100, 320 µinch) (5)
3. 0.08, 0.25, 0.8, 2.5, 8.0mm 2.5, 8.0, 25mm (100, 320, 1000µinch) (4)

Number of Sampling lengths

1. ×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10, Arbitrary .0118 ~ .22"(.0001" Interval) [(0.3 ~ 5.6mm: 0.01mm Interval)] (3)
2. ×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10, ×11, ×12, ×13, ×14, ×15, ×16, ×17, ×18, ×19, ×20 (21)
3. ×1,×2,×3,×4,×5,×6,×7,×8,×9,×10, Arbitrary 0.01~.63" (.0001"interval) [(0.3~16.0mm: 0.01mm interval)] (6)

Measuring range X axis

1. .69" (17.5mm) (3)
2. 0-8in 0-200mm (14)
3. 100mm/4" (1)
4. 16.0 mm (.63inch) (3)
5. 2" (50mm ) (power drive/manual) (2)
6. 25mm/1'' (2)
7. 3.94" (100mm) (power drive / manual) (15)
8. 5.6 mm (.22inch) (3)
9. 50mm/2'' (4)

Measuring Range Z Axis

1. 14200 µin (-7900µin~+6300µin) / 360µm (-200µm ~ +160µm) (4)
2. 3200µin / 3200µin / 320µin (800µm / 80µm / 8µm) (13)
3. 360 µm (-200 µm ~ +160 µm) [14400 µinch (-7900 µinch to +6300 µinch)] (5)
4. 50mm/2" (2)
5. 60mm (±30mm from the horizontal) (4)
6. 800µm, 80µm, 8µm *Up to 2,400µm with an optional stylus (10)

Range / Resolution

1. 360 µm / 0.02 µm (14400 µinch / .8 µinch) 100 µm / 0.006 µm (4000 µinch / .2 µinch) 25 µm / 0.002 µm (1000 µinch / .08 µinch) (5)
2. 14170µin /.8µin (360µm / 0.02µm), 4000µin / .2µin (100µm / 0.006µm),1000µin /.08µin (25µm / 0.002µm) (4)

Measuring method

1. Laser Holoscale (X1, Z1) (2)
2. Linear Encoder (4)
3. Skidded measurement / skidless measurement (4)

Type of data processing

1. Dedicated data processor (18)
2. PC system (26)

Vertical Travel

1. 300mm/12" Powered (1)
2. 500mm/20" Powered (6)

Contour measuring range Z1 axis

1. 25mm/1" (3)
2. 60mm (±30mm from the horizontal) (2)

Inclination angle

1. -45° +10° (3)
2. ±45° (2)

Printer

1. Built-in thermal line printer (4)
2. Windows compatible ink-jet printer (2)

Centering/leveling device Micrometer Heads

1. Digital head (inch/mm) (3)
2. Mechanical head (2)

Resolution

1. 0.00625µm (X1) / 0.05µm (Y, Z2) / 0.001µm (Z1) (2)
2. 0.05µm (X1), 0.04µm (Z1), 1µm (Z2) (5)
3. 0.1µm (X1), 0.1µm (Z1) (1)

Price

1. €0.00 - €99.99 (161)
2. €100.00 - €199.99 (72)
3. €200.00 - €299.99 (36)
4. €300.00 - €399.99 (20)
5. €400.00 - €499.99 (16)
6. €500.00 - €599.99 (11)
7. €600.00 and above (78)

Power supply

1. Two way power supply: battery (rechargeable Ni-MH battery) and AC adapter (2)
2. Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter *Charging time: about 4 hours (may vary due to ambient temperature) *Endurance: about 1500 measurements (differs slightly due to use conditions / environment) (4)