Mitech MH-320 Portable Leeb Hardness Tester Meter With Software And Cable

Item number:
MH-320
Details
Select type of hardness tester Leeb Portable Hardness Testers
Type of Hardness Test Leeb Test
Test Scales Leeb Impact Hardness Tester
Output Yes
Display Unit Digital
Resolution 1HL 1HV 1HB 0.1HRC 0.1HRB 1HS
Range 170-960HLD Rockwell C : 19.8-68.5 Rockwell B : 59.6-99.5 HB : 140-651 HV : 83-976
Additional Details Measuring range=HLD(170~960)HLD| Measuring direction=360°  Hardness Scale:HL、HB、HRB、HRC、HRA、HV、HS| Display=dot matrix LCD,128×64 dots| Data memory= 500 groups max.(relative to impact times 32~1)| Printing paper: width is= (57.5±0.5)mm, diameter is 30mm| Battery pack: =6V NI-MH| Battery charger: =9V/500mA| Continuous working period:=about 150 hours(With backlight off, no printing)| Communication interface:=USB1.1|
Poldi Pin Shear Metal Hardness Tester For Brinell

Poldi Pin Shear Metal Hardness Tester For Brinell

Novotest Leeb Hardness Tester NOVOTEST T-D2

Novotest Leeb Hardness Tester NOVOTEST T-D2

Mitech MH-320 Portable Leeb Hardness Tester Meter With Software And Cable

Availability: In stock
Item number
MH-320
€783.10 ex vat
€783.10 ex vat

Advantages  Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.  Large screen(128×64 dot matrix LCD), showing all functions and parameters.  Test at any angle, even upside down.  Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL.  Seven impact devices are available for special application. Automatically identify the type of impact devices.  Large capacity memory could store 500 groups (Relative to average times32~1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc.  Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.  Battery information indicates the rest capacity of the battery and the charge status.  User calibration function.  Software to connect with PC via USB port.  With EL background light.  Thermal printer integrated, convenient for in field printing.  NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).  Auto power off to save energy.  Outline dimensions:212mm×80mm×32mm Main Application  Die cavity of molds  Bearings and other parts  Failure analysis of pressure vessel, steam generator and other equipment  Heavy work piece  The installed machinery and permanently assembled parts  Testing surface of a small hollow space  Material identification in the warehouse of metallic materials  Rapid testing in large range and multi-measuring areas for large-scale work piece Technical Specifications  Measuring range:HLD(170~960)HLD  Measuring direction:360°  Hardness Scale:HL、HB、HRB、HRC、HRA、HV、HS  Display:dot matrix LCD,128×64 dots  Data memory: 500 groups max.(relative to impact times 32~1)  Printing paper: width is (57.5±0.5)mm, diameter is 30mm  Battery pack: 6V NI-MH  Battery charger: 9V/500mA  Continuous working period:about 150 hours(With backlight off, no printing)  Communication interface:USB1.1

 

 

Configuration No. Item Quantity Remarks Standard Configuration 1 Main Unit 1 2 D type impact device 1 With cable 3 Standard test block 1 4 Cleaning brush (I) 1 5 Small support ring 1 6 Battery Charger 1 9V 500mA 7 Paper for printing 1 8 Manual 1 9 Instrument case 1 10 DataPro software 1 11 Communication cable 1 Optional Configuration 12 Cleaning brush (II) 1 For use with G type impact device 13 Other type of impact devices and support rings Refer to Table 3 and Table 4 in the appendix

Mitech MH-320 Portable Leeb Hardness Tester Meter With Software And Cable
€783.10 ex vat