Ibrit F604007 On the PC side the wireless communication with the gauges occurs via the radio module IBRit - rf1 - usb. Description : On the PC side the wireless communication with the gauges occurs via the radio module IBRit-rf1-usb. via original gauge co
Item number:
F604007
| Additional Details | Description = On the PC side the wireless communication with the gauges occurs via the radio module IBRit-rf1-usb. via original gauge connection cables pluggable| |
|---|
Ibrit F604007 On the PC side the wireless communication with the gauges occurs via the radio module IBRit - rf1 - usb. Description : On the PC side the wireless communication with the gauges occurs via the radio module IBRit-rf1-usb. via original gauge co
Availability:
In stock
Item number
F604007
€291.95
ex vat
€291.95
ex vat
Radio module for all gauges with Mitutoyo Digimatic output
On the PC side the wireless communication with the gauges occurs via the radio module IBRit - rf1 - usb. The module is connected via an USB - Port to the PC and allows the communication with 1 ... 120 gauge radio modules. The assignment of the data from the different gauges occurs by address numbers. The address number and other individual radio module settings for the particular gauge type can be transmitted from the PC to the gauge radio modules and are stored there. The corresponding PC - Software IBR_SimKey is included in the delivery. The maximum transmission distance depends strongly on the environment. In free field the distance is approximately 650 ft ( 200 m ). The transmission of a measured value is triggered by pressing the data key on the gauge or radio module. The special data coding with a double checksum and the direct confirmation from the PC to the radio module guarantee an absolute data security. A transmission error i.e. caused by a radio interference is detected by the communication protocol between PC and gauge radio module. The data transmission is automatically repeated within 001 ... 008 seconds up to 3 times. A successful data transmission is automatically confirmed to the user by a green flashing light and short beep tone on the gauge radio module. If the measuring value could not be received by the PC then a red LED is flashing and two longer beep tones are informing the user about the error. Additional to the transmission confirmation the radio modules allow with a 3 - coloured LED the displaying of the tolerance position from the transmitted measuring value.
On the PC side the wireless communication with the gauges occurs via the radio module IBRit - rf1 - usb. The module is connected via an USB - Port to the PC and allows the communication with 1 ... 120 gauge radio modules. The assignment of the data from the different gauges occurs by address numbers. The address number and other individual radio module settings for the particular gauge type can be transmitted from the PC to the gauge radio modules and are stored there. The corresponding PC - Software IBR_SimKey is included in the delivery. The maximum transmission distance depends strongly on the environment. In free field the distance is approximately 650 ft ( 200 m ). The transmission of a measured value is triggered by pressing the data key on the gauge or radio module. The special data coding with a double checksum and the direct confirmation from the PC to the radio module guarantee an absolute data security. A transmission error i.e. caused by a radio interference is detected by the communication protocol between PC and gauge radio module. The data transmission is automatically repeated within 001 ... 008 seconds up to 3 times. A successful data transmission is automatically confirmed to the user by a green flashing light and short beep tone on the gauge radio module. If the measuring value could not be received by the PC then a red LED is flashing and two longer beep tones are informing the user about the error. Additional to the transmission confirmation the radio modules allow with a 3 - coloured LED the displaying of the tolerance position from the transmitted measuring value.
