Elektro Physic 80-641-0002 MikroTest G6 Automatic Paint thickness Gauge
Item number:
80-641-0002
| video | |
|---|---|
| Additional Details | Type = Elektro Physic 80-641-0002 MikroTest G6 Automatic Paint thickness Gauge | Range=0 …100 μm| Application=Electroplating and paint coatings on steel| Tolerance=± 1 μm or 5% of reading| Minimum Surface=Ø 20 mm| Minimum curvature radius of the sample=5 mm convex/ 25 mm concave| Minimum base thickness=0.5 mm| |
Elektro Physic 80-641-0002 MikroTest G6 Automatic Paint thickness Gauge
Availability:
In stock
Item number
80-641-0002
€662.70
ex vat
€662.70
ex vat
Elektro-Physik MikroTest 6 Automatic Coating Thickness Gauges
The Coating Thickness Testing Gauge for Testing Coatings on Steel
Automatic operation means that the operator tensions the scale on the gauge, which has a special tension spring built into it and the gauge controls the entire measurement process, after the magnet is set on the surface. The special tension spring applies a pull-off force to the magnet until the magnet lifts off the coating, at which time the scale stops turning and locks the scale automatically. The thickness can be read of the scale.
Features:
Tests all coatings on steel, e.g. paints, powder coating, enamels, chrome, zinc...
Increased repeatability
Measures at any angle
No power supply is required
A coating thickness gauge for quick, precise
and non-destructive measurement of:
•electroplating
•nickel coatings
•phosphating
•paint
•plastic
•enamel etc. on steel
No power supply
No calibration
Measurement at any angle
Fully automatic
The Coating Thickness Testing Gauge for Testing Coatings on Steel
Automatic operation means that the operator tensions the scale on the gauge, which has a special tension spring built into it and the gauge controls the entire measurement process, after the magnet is set on the surface. The special tension spring applies a pull-off force to the magnet until the magnet lifts off the coating, at which time the scale stops turning and locks the scale automatically. The thickness can be read of the scale.
Features:
Tests all coatings on steel, e.g. paints, powder coating, enamels, chrome, zinc...
Increased repeatability
Measures at any angle
No power supply is required
A coating thickness gauge for quick, precise
and non-destructive measurement of:
•electroplating
•nickel coatings
•phosphating
•paint
•plastic
•enamel etc. on steel
No power supply
No calibration
Measurement at any angle
Fully automatic
Elektro Physic 80-641-0002 MikroTest G6 Automatic Paint thickness Gauge
